1 8

Wetsuit 2/2 Zipperless Explorer III

Wetsuit 2/2 Zipperless Explorer III

149,25€
149,25€ 199,00€
Save 49,75€ Sold out
Taxes included. Shipping calculated at checkout.

Color: GRIS FONCÉ

Taille
Couleur
  • Thickness 2/2 mm
  • Zipperless entry system
  • Long sleeve
30-day returns
Shipping in 48-72h
2-year warranty

Description

  • Mineralprene, with a blend of recycled oyster shells and Limestone.
  • Thickness 2/2 mm, for lighter feel and greater freedom of movement.
  • Zipperless system, with no zip for a more flexible construction.
  • C-FLEX 2.0, a lining that provides greater softness and comfort.
  • Deeply Fastdry, for quick drying and greater thermal comfort.
  • Glued and stitched seams, for greater strength and durability.
  • Seams internally sealed with Neo Tapes 2.0 elastic tape.
  • No Flushing Bars, to help reduce water entry through the neck.
  • Internal Rubber Dots, inner rubber dots to keep the cuffs in place.
  • Knee pads with a more ergonomic design, for greater comfort and protection.
  • Improved cuts on the back and sides of the legs, allowing greater mobility and less restricted movement.
  • Foam recovery technology that helps maintain the integrity of the neoprene

Materials and technology

Our men's Explorer range was consciously developed, using environmentally friendly materials and prioritizing extreme comfort and durability.

Our Mineralprene remains the neoprene of choice for its sustainable composition, a blend of recycled oyster shells and limestone. Along with the introduction of our new C-FLEX 2.0 lining, which provides extra comfort and softness, the Explorer has been further improved with a new design of more ergonomic knee pads and new cuts on the back and sides of the legs, allowing more mobility and less movement restriction.

Together with our memory foam recovery technology, which maintains its integrity, the Explorer has glued and stitched seams with an invisible finish, ensuring greater comfort and durability.

Shipping and returns

Shipping: free on orders over €150 to most of Europe, including France, and over €200 to Finland, Sweden, Cyprus and Malta.
Delivery: between 3 and 7 working days.
Returns and exchanges: within 30 days.

Care

Always rinse it in cold water without soap (don't put it in the washing machine or the dryer).

Take the wetsuit off calmly, always using a Deeply change mat or a bucket. Be careful with your nails, as they can tear the neoprene. Don't overstretch the neoprene, as this can break the stitching and seams. In summer or hot weather, take the wetsuit out of the car as soon as you arrive. Store it hanging, without folding it. Don't remove surf wax, as trying to do so damages the neoprene.

View full details

Materials and Sustainability

  • Mineralprene

    Mineralprene

    Mineralprene is made by mixing limestone with waste oyster shells. The oyster shells are recycled and converted into oxide powder. This allows us to reduce the amount of limestone used in the composition of our wetsuits. This way, we produce a more natural and comfortable rubber foam.
  • Limestone

    Limestone

    This is a limestone mineral rock. Our wetsuits use earth-mined limestone to replace petrochemicals. It’s a natural mineral that helps us reduce the environmental impact of our wetsuits. This is not only better for the environment, but it’s also better for you. Limestone offers increased flexibility, is lighter, and provides increased sun protection.

More freedom. More comfort in the water

Developed for sessions in milder water, the Explorer III 2/2 combines a zipperless construction with flexible materials and a design built for comfort and freedom of movement. The C-FLEX 2.0 lining adds extra softness, while glued and stitched seams, sealed on the inside, help maintain protection and durability throughout every session.
  • 2/2 mm
  • C-FLEX 2.0
  • DEEPLY FASTDRY
  • ZIPPERLESS

Frequently asked questions

How do I know what size to choose?
Please consult the size guide available on the product page and compare your measurements with the corresponding chart.

A wetsuit should fit snugly against the body, without large folds or air pockets, but it should allow you to breathe and move normally. It may feel tighter at first and will adapt slightly after the first few sessions.

If you are between two sizes or need help, please contact our Customer Service team, providing your height, weight, and main measurements.
Is the product suitable for cold water?
It depends on the thickness and the model. As a general reference, 3/2 mm suits are suitable for temperate water, while 4/3 mm or 5/4 mm models offer greater insulation for colder water.

How warm you feel also depends on the water temperature, wind, session length and your sensitivity to cold. Always check the features and temperature recommendation shown on the product page.
Does the suit restrict movement?
It should not restrict your movements if you have chosen the correct size. The suit should be snug to reduce water entry, but allow natural mobility of the shoulders, arms and legs.

If large creases appear, too much water enters, or you feel excessive pressure that makes breathing or movement difficult, double-check the size and fit of the model.
How should I care for the product after use?
Always rinse it thoroughly with cold water after each use to remove salt, sand and other residues. Do not use a washing machine, tumble dryer, bleach or aggressive products.

Dry it in the shade, away from direct sunlight and heat sources. To prevent deformation, hang it on a suitable hanger or fold it at the waist while it dries. Store it completely dry, without compressing it and in a cool place.

When putting it on or taking it off, avoid pulling forcefully and be careful with fingernails and sharp surfaces, as these can damage the neoprene.
Are the seams reinforced?
Seam construction depends on the model. On each product page, you will find the type of seam and the technologies used.

Models designed for more demanding conditions may feature glued, stitched or sealed seams to improve strength and flexibility and reduce water entry. Please check the product specifications to confirm the exact construction of the model you have chosen.