Wetsuit Premium 3/2 Zipperless

Measure yourself

Enter your measurements and we'll tell you your exact size.

Height

Barefoot, in a straight line from the floor to the top of your head.

cm

Weight

Weigh yourself to get an initial size recommendation.

kg

Chest

Measure around the widest part of your chest, just below the armpits.

cm

Waist

Measure around your waist, just above the navel.

cm

Select your size

Your measurements

Recommended size:

Size	Height	Weight	Chest*	Waist*
XXS	162–166	54–61	83–88	69–74
XS	165–170	57–64	86–91	72–77
S	170–175	61–70	89–95	75–81
MS	172–178	64–73	91–98	77–84
M	175–180	68–77	94–101	80–87
MT	178–183	73–82	97–104	82–89
L	181–186	77–86	100–107	85–92
LT	184–189	78–84	102–109	86–93
XL	185–191	86–95	105–113	90–98
XXL	189–194	95–104	108–116	94–102

Prefer a different size?

Materials and Sustainability

Limestone
This is a limestone mineral rock. Our wetsuits use earth-mined limestone to replace petrochemicals. It’s a natural mineral that helps us reduce the environmental impact of our wetsuits. This is not only better for the environment, but it’s also better for you. Limestone offers increased flexibility, is lighter, and provides increased sun protection.

Zipperless, with everything you need

The zipperless version of the Premium range, the men's Premium 3/2 Zipperless was created for surfers who want mobility and comfort in water between 15 and 18 ºC. Limestone-based LX neoprene, a Nifco stopper with double elastic and sealed GBS seams make it an all-around choice.

15–18 ºC
ZIPPERLESS
LIMESTONE
GLIDE SKIN

Frequently asked questions

How do I know what size to choose?

Please consult the size guide available on the product page and compare your measurements with the corresponding chart.

A wetsuit should fit snugly against the body, without large folds or air pockets, but it should allow you to breathe and move normally. It may feel tighter at first and will adapt slightly after the first few sessions.

If you are between two sizes or need help, please contact our Customer Service team, providing your height, weight, and main measurements.

Is the product suitable for cold water?

It depends on the thickness and the model. As a general reference, 3/2 mm suits are suitable for temperate water, while 4/3 mm or 5/4 mm models offer greater insulation for colder water.

How warm you feel also depends on the water temperature, wind, session length and your sensitivity to cold. Always check the features and temperature recommendation shown on the product page.

Does the suit restrict movement?

It should not restrict your movements if you have chosen the correct size. The suit should be snug to reduce water entry, but allow natural mobility of the shoulders, arms and legs.

If large creases appear, too much water enters, or you feel excessive pressure that makes breathing or movement difficult, double-check the size and fit of the model.

How should I care for the product after use?

Always rinse it thoroughly with cold water after each use to remove salt, sand and other residues. Do not use a washing machine, tumble dryer, bleach or aggressive products.

Dry it in the shade, away from direct sunlight and heat sources. To prevent deformation, hang it on a suitable hanger or fold it at the waist while it dries. Store it completely dry, without compressing it and in a cool place.

When putting it on or taking it off, avoid pulling forcefully and be careful with fingernails and sharp surfaces, as these can damage the neoprene.

Are the seams reinforced?

Seam construction depends on the model. On each product page, you will find the type of seam and the technologies used.

Models designed for more demanding conditions may feature glued, stitched or sealed seams to improve strength and flexibility and reduce water entry. Please check the product specifications to confirm the exact construction of the model you have chosen.

Wetsuit Premium 3/2 Zipperless